Product Short Description
These Keyless Go Repeater starter kits are designed to test the device before paying in full. The Keyless Repeater starter kit is designed to demonstrate the operation of the device so that you can personally make sure of the high quality, stable reliability and great capabilities of our device.
Starter kits consist of 2 devices (small and large box), as in the full unlimited version of the device. You will be able to personally check its work in practice and feel its advantages.
You will receive a fully working version of Keyless Repeater, which you can fully use 3 times (you will be given 3 attempts). After 3 uses, the device will be locked. And only remote firmware by our engineers will allow you to restore the device to a full unlimited version. It is simple and fast, you just need to contact us in one of the ways available to you and have access to the Internet, we will do the rest remotely. After the firmware, you will have a full-fledged unlimited device. But it will be possible to restore the device only within 1 month after the parcel is delivered to you. In this case, the remote firmware no longer helps, the device will need to be sent back to our service center, where engineers will replace the elements that self-destructed after the timer went off.
It’s almost like putting together a new device. Therefore, we strongly do not recommend bringing you to such a state, plan your time and your budgets in advance! We have been forced to introduce this limitation so that speculators and scammers can no longer resell our demo devices as new, while buying starter demo kits and selling as completely new unlimited versions, holding personal meetings and testing supposedly working equipment. This time is more than enough to test the device, make sure it works and is of good quality. It takes 20 minutes to figure out everything to test the device. Our equipment is as easy to use as possible, during the development we strived for maximum simplicity and intuitive operation. Because our device is the easiest to use, and also have displays on each of the two boxes – small and large – to make it as convenient as possible for you.
From a financial point of view, the keyless repeater starter kit provides a unique opportunity, paying only a fraction of the cost of the full unlimited version of the device, you can experience all its functions live and test 3 full times. You can personally verify the performance and compliance with all technical specifications. And most importantly, you can be sure that we work honestly and provide only high-quality equipment.
There are 3s types of Keyless Repeaters Starter Kits:
- Starter Kit Multibrand
- Starter Kit Multibrand with FBS4
- Starter Kit 2022
They differ in a set of internal components and upgrade options. Each of these packages can only be upgraded to their respective full unlimited versions.
The cost of starting demo versions of Keyless go repeaters is calculated on a 50/50% basis and varies from 4750 to 6800 euros or US dollars.
Be sure to see the detailed description below!
And contact us through this contact form right now:
4750€ – 6800€
Description
The cost of full unlimited versions of keyless go repeater (4 versions)
As you already know, we have 4 versions on our website. All of them have an unlimited number of possibilities of use. You can learn more about each of the versions on the corresponding pages of this site or by clicking on the links in the price table below.
Keyless repeaters cost:
| Types | Price, euro |
| Keyless Repeater Multibrand | € 9,500.00 |
| Keyless Repeater Multibrand with FBS4 | € 11,200.00 |
| Keyless Repeater Multibrand with FBS4 + Android app | € 12,550.00 |
| Keyless Repeater 2022 | € 13,600.00 |
Keyless Go Repeater Starter Kits (demo version)
The demo kits has 3 starter versions. Keyless repeater starter kits differ in components that are the basis of the devices themselves. For example, the Starter Kit Multibrand version will not initially contain the components responsible for the FBS4 function. Thus, you will not be able to upgrade the Starter Kit Multibrand, which does not initially contain internal parts for FBS4, to the full unlimited version of the keyless repeater with FBS4 function. You can max upgrade this kit to the full version Keyless Repeater Multibrand. You can upgrade each starter kit to the full unlimited version of the keyless repeater that corresponds to it.
Types of Starter Kits:
- Starter Kit Multibrand
- Starter Kit Multibrand with FBS4
- Starter Kit v.2022
Cost of keyless starter repeater kits
Payment consists of 2 parts:
1) 50% prepayment. You pay 50%, after which we prepare for you an individual starter demonstration kit of equipment and send it to your address.
2) 50% upon receipt of equipment + 1000 dollars for maintenance. After the package is delivered, you need to pay the second 50% + 1000 USD for maintenance within 2 weeks. After that, the full version of the software without restrictions will be installed on your device.
| Keyless Repeater Starter Kits: | First payment part, € | Second part of payment, € |
| Starter Kit Multibrand | 4,750.00 (50%) | 4,750.00 (50%) + 1000 (for maintenance) |
| Starter Kit Multibrand with FBS4 | 5,600.00 (50%) | 5,600.00 (50%) + 1000 (for maintenance) |
| Starter Kit v.2022 | 6,800.00 (50%) | 6,800.00 (50%) + 1000 (for maintenance) |
+ $1,000 maintenance fee is charged due to the need to separately prepare an individual test starter kit and then install the full version of the software on your device by our specialists, as well as remove restrictions.
Payment of +1000 dollars is paid together with the second part of the payment, which must be paid within 2 weeks after receiving the package. If payment is not made within 2 weeks of receipt of the shipment, the maintenance cost for the test kit will increase from $1,000 to $3,000, so the total amount you pay will increase by $2,000. If within 2 weeks the client does not pay and continues to drag out time without paying the second part, then 1 month after the delivery of the parcel, the entire amount of the first prepayment in the amount of 50% paid by the client burns out, and a timer is triggered on the device that turns the equipment into a “brick” . In this connection, we ask you to plan your budget in advance before buying! Please make sure you have the full amount to pay and the time and ability to test the equipment for 2 weeks.
After receiving the test starter kit, do not turn on the equipment unnecessarily, each inclusion is counted as 1 test use, of which there are only 3-5 depending on the version of the equipment. We assure you that 2 weeks of testing is more than enough to determine if the equipment works and make sure it works well. The average time required for testing is 1-2 hours. As for the number of attempts to test, but they do not depend on the number of cars with which you are testing. After turning on the equipment, you can test the device for 3 hours on any number of vehicles, after which it will turn off. And so 3-5 times. As soon as you turn the equipment on and off, one attempt works. You can test the hardware on all the machines you have in 1 try. Please note that we will not be able to increase the number of attempts if you use them by accident. Please prepare in advance, we recommend that you prepare 3-4 cars with Keyless Go for testing at once, take permission from the owners of these vehicles for testing and safely test without any problems. We also recommend that you record the entire process on video if you have any questions afterward, so that we can tell you what you did wrong. Or just send us a video, we will be pleased!
Keyless repeater starter kits upgrade options
1. Upgrade options Keyless repeater Starter Kit Multibrand
The Starter Kit Multibrand (base kit) costs: 4,750.00 €
It is possible to update Starter Kit Multibrand remotely. To do this, please contact our service center. The update is remote, fast and not complicated.
3 consecutive upgrade stages available:
| Keyless repeater Starter Kit Multibrand
4,750.00 € |
+ | 3,000.00 € | = | Ⓐ | Toyota/Lexus/Subaru until 2018 |
| 4,000.00 € | = | Ⓑ | Toyota/Lexus/Subaru (2018-2021) + Ⓐ | ||
| 5,750.00 € | = | Ⓒ | Multibrand full mode + Ⓐ + Ⓑ |
These stages/versions upgrade the keyless go repeater to unlimited use within the capabilities of each stage. At the same time, each successive update stage contains the current mode and the previous one. That is, mode Ⓒ contains modes Ⓑ and Ⓐ, and mode Ⓑ additionally contains mode Ⓐ. Mode Ⓐ contains only mode Ⓐ.
Also, there are intermediate stages that allow you to consistently increase the modes and move from stage to stage at a more favorable rate. For example, you bought mode Ⓐ (Toyota/Lexus/Subaru mode before 2018), but after a while you wanted to switch to mode Ⓑ – Toyota/Lexus/Subaru 2018-2021 mode, which already contains both mode Ⓐ and mode Ⓑ . But you have previously paid for the Ⓐ mode, and even before that for the Starter Kit Multibrand itself. Therefore, the cost of the transition will be even cheaper. You do not have to buy everything from scratch, you just pay a certain cost and your device is updated.
The cost of moving/upgrading from internal versions to higher class versions:
- Upgrade from Ⓐ to Ⓑ = 1,500.00 €
- Upgrade from Ⓐ to Ⓒ = 3,500.00 €
- Upgrade from Ⓑ to Ⓒ = 2,500.00 €
(i) It is IMPOSSIBLE to update Keyless Repeater Starter Kit Multibrand to version with FBS4! Keyless repeater Starter Kit Multibrand version does not contain any modules/components required for interaction with FBS4
2. Upgrade options Keyless repeater Starter Kit Multibrand with FBS4
The Starter Kit Multibrand with FBS4 (base kit) costs: 5,600.00 €
3 consecutive upgrade stages available:
| Keyless repeater Starter Kit Multibrand with FBS4
5,600.00 € |
+ | 3,000.00 € | = | Ⓐ | Toyota/Lexus/Subaru until 2018 |
| 4,000.00 € | = | Ⓑ | Toyota/Lexus/Subaru 2018-2021 + Ⓐ | ||
| 7,000.00 € | = | Ⓒ | Multibrand mode with FBS4 + Ⓐ + Ⓑ |
These stages/versions upgrade the keyless go repeater to unlimited use within the capabilities of each version. Please note that each successive update stage contains all previous versions and the current version. For example, version Ⓒ contains versions Ⓑ and Ⓐ, and version Ⓑ additionally contains version Ⓐ. In turn, version Ⓐ contains only version Ⓐ.
There are intermediate versions that allow you to consistently increase the capabilities of the device and move from version to version at a more favorable rate. For example, if you bought version Ⓐ (Toyota/Lexus/Subaru mode before 2018), but after a while you want to upgrade to version Ⓑ (Toyota/Lexus/Subaru mode 2018-2021), which already contains version Ⓐ, and version Ⓑ. But you have previously paid for version Ⓐ, and even before that for the Starter Kit Multibrand with FBS4. Therefore, the cost of the transition will be even cheaper.
The cost of moving/upgrading from internal versions to class modes is higher:
- Upgrade from Ⓐ to Ⓑ = 1,500.00 €
- Upgrade from Ⓐ to Ⓒ = 4,000.00 €
- Upgrade from Ⓑ to Ⓒ = 3,000.00 €
3. Keyless repeater Starter Kit v.2022
The Starter Kit v.2022 (base kit) costs: 6,800.00 €
This Starter Kit v.2022 upgrades immediately to the maximum version of Keyless Repeater 2022. In this case, there are no intermediate stages / upgrade versions. By purchasing the Starter Kit v.2022, which contains all the features of previous generations of Keyless Repeater devices released by our production, including FBS4 functions and many other innovations, you can upgrade this starter kit only to the full maximum version of Keyless Repeater 2022.
1 stage update available:
| Keyless repeater Starter Kit 2022
6,800.00 € |
+ | 7,800.00 € | = | Keyless Repeater 2022 |
Contact us via this feedback form:
Additional information
| Demo Keyless Repeaters | Keyless go repeater Starter Kit Multibrand, Keyless go repeater Starter Kit with FBS4, Keyless go repeater Starter Kit 2022 |
|---|
Reviews
There are no reviews yet.